Description: Adapter Thickness: 50mm (2 Inch) each side Quantity: 2 Pieces Bolt Pattern: 5x135 (Hub) to 6x135 (Wheel) Hub Bore: 87.1 mm Thread Pitch: 14X2 Adapter Type: Conversion Adapters Installation Note: This is a 2-Piece Adapter where the bottom plate will be mounted onto the hub. The factory studs may need to be trimmed down in order for the top plate to mount onto the bottom adapter plate to seal without any slight gap in between.(VERY IMPORTANT!! ) Make sure hub, studs or lug nuts from the vehicle do not contact the 2nd piece of the adapter or it will cause failure Test fit the product before fully bolt down - Securely tightened the black bolt that uses to hold the 2 piece adapters together (Torque set at 55-60lb max) Be sure to retorque the adapters after 20-25 miles of driving **The height of the base plate adapter is approx. 30mm & the height of the factory studs can not exceed 28mm to allow the top plate adapter to go on properly, Please be sure to check your vehicle prior to purchase
Price: 84.55 USD
Location: Fremont, California
End Time: 2025-02-06T23:26:40.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Brand: SWE-StanceWerk
Hub Bore: Center Bore 87.1mm
Warranty: 1 Year
Manufacturer Part Number: TF-CV-BEA-EJ
Material: 6061-T6 Aluminum w/ Class 10.9 Carbon steel wheel studs
Vehicle Bolt Pattern:: 5x135
Thread Size: 14X2
Bolt Pattern: 5X135 TO 6X135
Choose The Right Width: Measure the gap between the tire sidewall & fender well
Placement on Vehicle: Front Wheel, Rear Wheel
Type: Wheel Adapter
Wheel Bolt Pattern:: 6x135
Number in Pack: 2
Spacer Type: Conversion Adapters
Finish: Anodized Silver
Spacer Thickness: 50mm (2.0")
Performance Part: Yes
