STAGE 3 CLUTCH KIT+FLYWHEEL fits 2004-2011 MAZDA RX8 RX-8 1.3L by CLUTCHXPERTS

Description: STAGE 3 CLUTCH KIT+FLYWHEEL fits 2004-2011 MAZDA RX8 RX-8 1.3L by CLUTCHXPERTS Description ClutchXperts Stage 3 Racing Clutch Kit and ClutchXperts Liteweight Racing Flywheel combo setup is a brand new heavy duty racing pressure plate with 6 puck sprung racing disc setup with liteweight flywheel can hold up to 397HP / Rated 365lb-ft of torque. It is recommended for use with 'modified' vehicles used for "street and strip". This unit has also proven itself to be very capable for four wheel drive and off-road use, also heavy duty towing and commercial applications The ClutchXperts Stage 3 racing clutch system uses ClutchXperts Stage 3 Heavy duty pressure plate with 6 puck sprung ceramic disc.This is ultimate extreme-duty street or road / drag racing system. It is built using a special 6-wing ceramic button design disc for long life, outstanding holding capacity and high heat dissipation. All ClutchXperts Racing pressure plates are made from ductile iron (2100 LBS CLAMPING LOAD) which is about 60-70% stronger than conventional cast iron pressure plates other racing clutch manufactures use. It is recommended for use with 'modified' vehicles used for "street and strip". This unit has also proven itself to be very capable for four wheel drive and off-road use, also heavy duty towing and commercial applications. It offers 80% more holding capacity than a stock 'OEM' clutch while maintaining a stock pedal feel. About ClutchXperts 6 Puck Sprung Racing Disc- If you want the best the industry has to offer -- Ask for ClutchXperts 6 Puck Sprung Racing Disc. The ClutchXperts Racing 6 puck strip disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced ceramic pads delivering aggressive bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, the ClutchXperts Racing 6 puck strip disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality 'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. **The throwout bearing and pilot bearing (if required) included ($80 value) for free! Street or Long life of clutch BREAK-IN required. About ClutchXperts Liteweight Racing Flywheel: MORE ACCELERATION !! For maximum acceleration there is no substitute for an ClutchXperts Liteweight Racing Flywheel. The decrease in rotating mass allows maximum engine revs to be reached very quickly, resulting in a startling decrease in acceleration time. In some racing organizations, aluminum flywheels have actually been outlawed because they give such a huge advantage. RELIABLE AND SAFE!! Our ClutchXperts Liteweight Racing Flywheel is an ideal performance modification because it has no disadvantages. There are significant benefits of having a ClutchXperts Liteweight Racing Flywheel. Though it does not create additional horsepower, the flywheel does allow the engine to more rapidly transfer its power to the drive train. Due to its reduced mass, it allows an engine to have quicker throttle response and rev faster under acceleration. Conversely, under a drop throttle condition, the car will slow down quicker due to the less rotational mass at the crank. You lose nothing in reliability, safety, or drivability on the street. What you gain is neck-snapping acceleration from your car. Using a lightweight, ClutchXperts Liteweight Racing Flywheel is a race proven way to improve the performance of any street or race car. Liteweight flywheels have been used for many years by the world's most elite cars to improve both useable horsepower and extend engine life. Because a ClutchXperts Liteweight Racing Flywheel has so much less rotating inertia than the stock 20-30lb stock heavy flywheel., it is easier on your synchros. When you downshift and do not perfectly equalize revs, your synchros must accommodate the difference in flywheel speed and input transmission speed. The lighter the flywheel the less the inertia the synchros must overcome. The longer your synchros last the longer your tranny will last because you are less likely to miss-shift and break things when your synchros are properly functioning. Engine life is also increased by using a ClutchXperts liteweight flywheel. Since our flywheel is so much lighter there is much less stress on the main bearings. COMPONENTS: ClutchXperts Stage 3 Racing Heavy Duty 2100LBS Pressure Plate ClutchXperts Stage 3 6-Puck Ceramic Sprung Racing Disc Throwout bearing Alignment tool ClutchXperts 12lbs Forged Chromoly Lightweight Racing Flywheel ***NOTE-YOU NEED TO PURCHASE COUNTERWEIGHT SEPARATELY FOR $149.00. (REQUIRED, NOT INCLUDED)*** APPLICATION: 2004 - 2011 Mazda RX-8 (1.3L 13B-MSP; 6 speed) **FILE PICTURES ARE FOR REFERENCE ONLY. ACTUAL ITEM MAY VARY Image Gallery STOCK PHOTO Payment Shipping Returns RMA # : Message us through eBay for RMA#. We do not allow any return without RMA#. Return Shipping : Buyer is responsible for return shipping cost. Exchange : Up to 30days from of purchase (Brand new condition, no restocking fee). Return : All returns will be subject to 20% restocking fee. Return your purchase for up to 30 days from date of purchase for a refund. Must be in brand new, resalable condition. Damaged Item : Message us through eBay. Manufacturer Warranty : 3 months or 3,000 miles(whichever comes first) from the date of purchase. Contact Us ClutchXperts, Inc. We are located in Southern California Please contact us through eBay messages by clicking on "Ask a Question". Business Hours : 9AM - 5PM Mon-Fri (Pacific Standard Time).

Price: 224.34 USD

Location: Anaheim, California

End Time: 2025-01-26T14:45:22.000Z

Shipping Cost: 0 USD