Replace Motorcraft Oil Filter & Cap Super Duty 6.0 6.4L Powerstroke Diesel 03-10

Description: Description Fitment:Oil Filter Cap and OIL Filter for Ford 6.0L/6.4L Powerstroke F250 F350 F450 F550 Super Duty. Replaces part number:Cap:EC781,1840754C91,3C3Z-6766-CA.Filter:FL2016,3C3Z-6731-AA. Compatible with:2003-2007 6.0L F250 F350 F450 F550 Super Duty,2008-2010 6.4L F250 F350 F450 F550 Super Duty,2003-2005 Excursion. Notice:Periodic maintenance on a vehicle is advised for every 3000 to 5000 miles. That maintenance should include a change of the oil filter. Package includes:1 x oil filter cap,1 x oil filter,2 x o-ring seal. Compatibility Ford E-350 Super Duty 2004-2010 6.0L Ford E-350 Club Wagon 2004-2005 6.0L Ford E-450 Super Duty 2004-2010 6.0L Ford Excursion 2003-2005 6.0L Ford F250 Super Duty 2003-2007 6.0L/2008-2010 6.4L Ford F350 Super Duty 2003-2007 6.0L/2008-2010 6.4L Ford F450 Super Duty 2003-2007 6.0L/2008-2010 6.4L Ford F550 Super Duty 2003-2007 6.0L/2008-2010 6.4L Ford F650 2004-2008 6.0L Ford F750 2004-2008 6.0L Feature Complete filtration of engine oil, which ensures high performing fuel injectors and long engine life.Optimally screening out 98% of abrasives such as such as carbon, sand, dust and bits of metal before they get into your oil.Helps protect against engine wear.Protect your engine and keep your emissions control systems working properly.Precisely engineered for your Power Stroke Diesel engine.The oil filter should be changed every 7,500 miles under normal operating conditions and 5,000 miles under "severe" operating conditions. Installation instruction 1.Place a suitable drain pan (minimum 15 quart capacity) below the drain plug. 2.Remove the drain plug with a 19 mm or 3/4" box end wrench and allow the engine oil to drain completely. 3.Remove the oil filter cap on the top of the engine using a 36 mm socket. 4.Pull the oil filter and cap straight upwards to remove it from the filter canister. 5.Remove the oil filter from the filter cap by pulling it away from the cap. 6.Remove the old oil filter cap o-ring, Lubricate the new one with clean motor oil,then install it in place. 7.Install the new oil filter. Note that the oil filter clips into the oil filter housing. You will hear it snap into place if it is installed correctly. 8.Reinstall the assembly and torque cap to 25 Nm (19 lb-ft) 9.After adding the oil,run engine for 3 minutes and check for leaks.

Price: 14.02 USD

Location: Walton, Kentucky

End Time: 2024-11-21T13:46:31.000Z

Shipping Cost: 0 USD