Description: Reindeer Antler Set of 2 - Brown This is a replacement reindeer antler set for Empire brand blow molds. This is a 3d printed design created and printed by our family. We have carefully created these to closely resemble the original antlers that you can no longer purchase at retail. We have added the hole for the screws to go into. Just like the originals you will need to hold them in place with two screws coming down from the top as shown in my examples of them on the reindeer. No blow molds will be included with this purchase. This is only shown for reference. They have a small amount of roughness on the underside where the print has to be supported to make the fronts, back and sides look good. This will be the part underneath and will not be shown when displayed. We size as accurately as possible with pin type push thru parts making several sets until we are happy with the results, but your blow mold may be slightly smaller or larger due to difference in wear. You may need to add a small amount of glue to hold in place or sand or drill a tiny bit to make fit if too tight (do not force). These antlers also need to be screwed down to the blow mold to hold in place.
Price: 25.5 USD
Location: Eddyville, Kentucky
End Time: 2024-12-30T22:34:24.000Z
Shipping Cost: 8.5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Type: Blow Mold
