Open Box-Ultrasonic Hose Plastic Tube Sealing Machine Date Printer 110V

Description: Ultrasonic Plastic Tube Sealer 110V Controller This machine working stability, high efficiency. Stainless steel material could meet the corrosive products of the end of the seal, once formed, sealing at the same time automatically remove the excess edge. This machine is suitable for toothpaste, cosmetics, food and other hose sealing. Please note buyer need to prepare a air compressor and work wit this machine. Parameter: Power: 1250W Voltage: 110V Sealing diameter: 3.1inch (80mm) Processing height: 7.87inch (200mm) Weight: 140.8lb (64kg) Size: 31.5*17.7*41.7inch (80*45*106cm) Environmental temperature : 0℃ +35℃ Environment humidity: relative humidity below 85% Air pressure: 0.2----0.6 MPa Ultrasonic working frequency:20k Tube height: 50~180mm (adjustable) Removed more than expected : the edge of a straight line can be removed move than expected Working table: vertical/horizontal adjustable worktable Features: 1.The use of advanced chips to make the machine stability control. 2.Sealing, trimming, printing, once complete. 3.Sub-water care device can effectively intercept a small amount of dust and fog. 4.Ultrasonic tool head is made of stainless steel, it is sharp edge and durable. 5.Thicker material makes the machine more durable. This machine adopts ultrasonic sealing, sharp blade, make sealing more efficient, more tidy. The barometer and the air inlet, the air inlet is connected with the air compressor, easy to operate, stable performance. Equipped with digital display screen, working parameters can be set according to request. Product safety precautions: 1. The working environment of the machine shall be dry, and an operator shall wear plastic or rubber shoes; 2. The transducer system shall not be dismounted and replaced when the machine is switched on; 3. Do not put two hands below the tool head to prevent the hands from being injured through ultrasonic waves in case of ultrasonic wave generation during working or test of the machine; 4. The welding die shall not be in direct contact with the base or the metal clamp of the machine in working or test; 5. High-quality ventilating equipment shall be arranged in the operating acoustic field when plastic workpieces with odors are processed; 6. During operation, operation shall be immediately stopped in case of abnormal noise or that the transducer system is heated to 50 DEG C or even higher, and the operator shall test the working frequency of the machine and check whether the machine is normal; 7. Do not switch on the machine immediately after a broken fuse of the machine is replaced, and the machine cannot be switched on until a trained technician check srelevant parts of the machine to confirm that other faults do not exist in order to avoid extension of the fault; Note: 1.Do not turn on the machine before placing any operating materials, it will burn the fuse. 2.Our machines are always used on the first gear when they leave the factory. If customers shift to the second and third gears, they must first check the ammeter. If it is higher than 1, they must adjust the frequency screw to reach 1 before it can work, otherwise it is easy to burn out the power tube Item Number: 160175 Ultrasonic Plastic Tube Sealer with date/ letters pritner

Price: 1395.55 USD

Location: Tampa, Florida

End Time: 2025-01-29T01:31:37.000Z

Shipping Cost: 0 USD