Hunter Genuine Replacement Handheld Ceiling Fan Remote Control Transmitter 99122

Description: Genuine Original Hunter Replacement Remote Control #99122 For Hunter Ceiling Fans This is a direct replacement for remote #s: 99122 or 99123 Wall bracket not includedWireless receiver not included Requires 3V CR2032 Battery (included) Part #K0474-01 FCC ID: IN2TX41 FREQ: 434 MHz Part #K0474 must match for compatibility. Please inquire if you're not sure. Pairing Instructions:Note: The remote must be paired before the fan will operate. Turn off the breaker that powers the fan. Leave power off for 1 minute and then turn back on. Within 3 minutes of restoring power to the fan, press both the Fan Off button and the High button for at least 4 seconds. Your fan will turn on low to indicate successful syncing. If it does not, turn off power to your fan, wait 1 minute then try again. If using the transmitter with multiple fans, repeat this process for each fan. If fan is a pull-chain model, please make sure that pull-chain control is set to High speed for remote to work correctly.

Price: 39.99 USD

Location: Fort Worth, Texas

End Time: 2024-09-02T03:29:27.000Z

Shipping Cost: 0 USD