Fuel Injector Tester Cleaner & Adapter DIY Cleaning Tools Kit Set(Tester+Adapte)

Description: Shop Category Store Home Automotive Tester Digital Multimeter Digital Clamp Meter Voltage Tester Environment Tester Battery Tester Metal Detector Pen Probe Digital Multimeter Stud Finder Wood Moisture Tester Handheld Digital Scopemeter Professional Tester Home Meter Netcable Tester OtherALL SUN Fuel Injector Tester Cleaner & Adapter DIY Cleaning Tools Kit Set(Fuel InjectorTester +Adapter) ALLOSUN DIY Fuel Injector Tester Cleaner Adaptor Kit ALLOSUN DIY Injector Cleaner adaptor kit is to easily clean almost all types of car motorcycle fuel injectors. Package Includes: 1 fuel injector tester EM276 & 2 white tubes to fits two different size injectors. Adaptors: The 2 white tube adaptors are for connecting the injector nozzle and car cleaning liquid flush.Compatible fuel injector nozzle brand: Bosch, Denso, Delphi, Siemens, Magnetic Marell ( except Cylinder Direct-Injection Nozzle ) Fuel Injector Tester EM276: The tester can help diagnose injector problems,you can use it to test each injector individually to help idently stuck, leaking or burnt-out conditions.It uses 12V vehicle battery for power. It has 4 pulse modes, the continuous mode (mode 4) helps identify good or bad injector. The mode lock feature ensures test condition uniformity. It can work with any fuel pressure tester. The cleaning operation(as picture above) requires aerosol can of fuel injection cleaner(not included), injector connector (not included) and 12v DC battery power supply (not included). Please prepare these necessary tools before your cleaning. SPECIFICATION EM276 Power Supply:12V vehicle battery Operation Environment:0-40°C, relative humidity?80% Storage Environment:-10°C ~50°C, relative humidity?85% Test Cable Length: 41.5cm/ 16.3 inches Product Size:147x82x29mm 2 x fuel cleaning injector nozzle adapter Material: ABS; Weight: 20g; Size: 4.33 x1.06 inches; Operation Instruction 1.Turn off the vehicle?s engine. 2. Connect the black clip to the negative terminal of the vehicle battery, connect the red clip to the positive terminal of the battery. 3.Locate the fuel injector which you want to test, then remove the electrical cable from this injector and connect the tester?s two pulse output terminals to the electrical connector of this injector. 4.Press the MODE SET key to select the desired pulse mode, the display shows the current pulse mode. 5. After you have selected the desired pulse mode, press the PULSE key. The tester outputs pulse(s) to the injector under test, the pulse signal indicator will light as indication. PLEASE NOTE: Gasoline engine only, NOT the diesel engine. Explanations for the 4 Modes: Mode1: the tester will output 1 pulse, whose pulse width is about 250ms. Mode 2: the tester will output 50 pulses, every pulse?s pulse width is about 7ms. Mode 3: the tester will output 100 pulses, every pulse?s pulse width is about 3.5ms. Mode 4: the tester will output continuously at the rate of 50 pulses per about 1450ms, every pulse?s pulse width is about 7ms. At any time, you can press the PULSE key again to stop outputting pluse. Operation Tips: Re-connect the Battery when you SWITCH the MODE Product Description The tester can help diagnose injector problems, you can use it to test each injector individually to help ardently stuck, leaking or burnt-out conditions. It uses 12V vehicle battery for power. It has 4 pulse modes, the continuous mode (mode 4) helps identify good or bad injector. The mode lock feature ensures test condition uniformity. It can work with any fuel pressure tester. SPECIFICATION Power Supply: 12V vehicle battery Operation Environment: 0-40C, relative humidity<80% Storage Environment: -10C 50C, relative humidity<85% Test Cable Length: 41. 5cm/ 16. 3 inches Product Size: 147x82x29mm Operation Instruction 1. Turn off the vehicle?s engine. 2. Connect the black clip to the negative terminal of the vehicle battery, connect the red clip to the positive terminal of the battery. 3. Locate the fuel injector which you want to test, then remove the electrical cable from this injector and connect the tester?s two pulse output terminals to the electrical connector of this injector. 4. Press the MODE SET key to select the desired pulse mode, the display shows the current pulse mode. Explanations for the 4 Modes: Mode1: the tester will output 1 pulse, whose pulse width is about 250ms. Mode 2: the tester will output 50 pulses, every pulse?s pulse width is about 7ms. Mode 3: the tester will output 100 pulses, every pulse?s pulse width is about 3. 5ms. Mode 4: the tester will output continuously at the rate of 50 pulses per about 1450ms, every pulse?s pulse width is about 7ms. At any time, you can press the PULSE key again to stop outputting pulse. 5. After you have selected the desired pulse mode, press the PULSE key. The tester outputs pulse(s) to the injector under test, the pulse signal indicator will light as indication. PLEASE NOTE: Gasoline engine only, NOT the diesel engine. Operates injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection.Works with engine off and pulse timer may be used with fuel pressure gauge.Large LED display/4 Pulse Modes. Test Lead: 41.5cm / 16.3 inches.It work with any fuel pressure tester. IMPORTANT NOTE: Gasoline engine only, NOT for diesel engine.Powered by 12V battery. Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing. Note: Orders from the USA will all be shipped out via our US warehouse. If you order from outside of US the product will be shipped from China. Copyright of XXXX. All rights reserved.

Price: 29.69 USD

Location: Chino, California

End Time: 2023-09-07T09:08:34.000Z

Shipping Cost: 0 USD