Description: EGW Venom Adapter Plate For Sig Sauer M17 / M18 Optics Ready Evolution Gun Works EGW ***This mount only fits Optics Ready guns*** This mount fits: Sig M17 (with Romeo1 PRO cut) Sig M18 (with Romeo1 PRO cut) Sig P320 X-Five Legion (with Romeo1 PRO cut) Sig P320 X-Carry Optics Ready (with Romeo1 PRO cut and no rear sight cut) Sig P320 X-Compact (with Romeo1 PRO cut and no rear sight cut) This mount does not fit: Any Sig P320 models with dovetail cut for rear sight Sig P320 RX Sig P320 RX X-Compact Sig P320 X-Five (with Romeo1 cut) Sig M17 Military Surplus We have found that minor fitting may be required to the rear step of the adapter plate due to slightly undersized cuts on Sig's slides. This can easily be done by filing on the rear step until the mount fits in the cut. Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.775" Overall Width: .99" Torque Specs: 15 in/lbs Mounting Hardware: (2) 6-32 x 5/8" Button Head Screws - Requires 5/64 Wrench or Driver (2) 6-32 x 3/8" Flat Head Screws - Requires 5/64 Wrench or Driver (2) 4-40 x 1/4" Socket Cap Head Screws - Requires 3/32 Wrench or Driver Red Dot Fitment: Vortex Viper Vortex Venom Burris Fast Fire 1, 2, 3, 4 Docter ADE RD3-001 ADE RD3-002 ADE RD3-009 UTG Reflex Micro Dot Crimson Trace CTS-1200 Crimson Trace CTS-1300 Sightmark Mini Shot Sightmark Core Shot *All ADE mounts require 6-32 x 3/8" screws. Please note: We have found that some red dots commonly found on Amazon such as the UTG and ADE may not hold the same tolerances as the red dots that this mount was initially created to work with. These dots may not fit properly on the posts on the plate. We would recommend either sending the red dot back for an exchange to whichever seller you purchased it from, or open up the holes in the bottom of the red dot to accommodate the pins. Our EGW red dot sight adapter plate for the Sig Sauer M17 and M18 allows you to mount a Vortex Viper, Vortex Venom, Burris Fastfire or other Docter footprint red dot sight to your Sig Sauer M17 and M18 with the Romeo1Pro factory cut slide. Please confirm your model before purchasing. The rear sight plate on your gun needs to be removed to install your red dot on this plate. The plate is mounted to the slide from underneath the slide using the provided 4-40 screws. The red dot is then installed on top of the adapter plate using the provided 6-32 screws. Installation Instructions - Remove the optics plate from your slide - Install the EGW adapter plate - Place the red dot sight on the EGW red dot adapter plate (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) - Apply blue Loctite to the provided mounting screws - Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. Please note not all parts are "drop in". As with all gun parts some installations may require disassembly and reassembly. Some parts may require installation by a qualified gunsmith. !!ALWAYS MAKE SURE YOUR FIREARM IS UNLOADED BEFORE PERFORMING ANY MAINTAINANCE OR UPGRADES!! No Liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This product should be installed and checked by a qualified gunsmith. Not doing so or using the wrong tools may damage the part and/or your firearm. All Products are made in the USA by Americans. Should you have any questions or issues with your new product please contact me. It is my goal to make my customers 100% satisfied with their purchase (within reason). ***Please Note: All returns MUST Be In Original Packaging and in a resalable, brand new condition. Item(s) must be in new/unused/unworn condition for an exchange/refund. Application errors will incur a minimum of 15% restocking fee. If you are not sure of the product and its use please contact The Sporting Jack for applicability and questions. Used and/or damaged items must be exchanged through the specific manufacturer for warranty issues. If you have any questions or Issues, we are here to help. The Sporting Jack Outfitters is a Certified Service-Disabled Veteran-Owned Small Business. Thank you for your business-Dave Kravetz
Price: 49.95 USD
Location: Victor, NY
End Time: 2024-10-04T16:13:16.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Evolution Gun Works EGW
Model: Sig optic ready
Type: Handgun Base
California Prop 65 Warning: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Country/Region of Manufacture: United States
Custom Bundle: No
Modified Item: No
MPN: 49201
