AudioControl LC2i PRO Amplifier Integration Solution for 2013-23 Dodge Jeep Ram

Description: Welcome to the UpBeat Store, your ultimate destination for top-tier automotive aftermarket installations, covering both OEM and aftermarket radios with precision and finesse. With over 12 years of specialized experience, trust us to elevate your driving experience seamlessly. Don't forget to follow us and visit frequently for the latest deals. Our dedicated customer service team is here to assist you promptly and professionally as we turn your automotive aspirations into reality! This listing includes two new items, AudioControl LC2i PRO 2-channel active line output converter and line driver with remote control and the PAC LPHCH41 LocPro Advanced Audio Integration T-Harness, the perfect 2-channel installation combo for aftermarket amplifiers on select non-amplified 2013-2023 Chrysler, Dodge, Jeep and RAM vehicles with a 52-Pin radio connector. LC2i PRO is an active, high-voltage OEM line converter. This compact, two-channel processor with active input circuitry, accepts speaker-level signals of up to 400-watts per channel from factory-installed source units or amplifiers. It then converts the speaker-level signals to high-quality pre-amp signals that can be directed to after market processors and/or amplifiers. The LC2i PRO features a 3-way input load selector, for improved factory system integration, and an ACR-1 Remote Level Control for adjusting the Bass output signal from the driver's seat. The LPHCH41 makes amplifier installation a lot easier by giving you access to the speaker-level output signals from your Chrysler, Dodge and Jeep factory radio. You can use this T-harness to connect to an amplifier or signal processor with speaker-level inputs, or to a line output converter with an amp. PAC designed this vehicle-specific T-harness to work almost any sound processor or line output converter, as well as most amplifiers with high-level inputs. The harness also supplies the connection wires for low-power constant 12 volts (fused for your protection), accessory power, ground, and remote turn-on leads for a system device like an active signal processor. What's Included?AudioControl LC2i PRO converterTwo 4-pin captive-screw connector(installed)ACR-1 Level control16.5' Level-control cableLPHCH41 V5 Main 52-Pin wiring 8" harnessClearly labeled pigtail harnessesLPH-CH41 V5-A Harness (front signal from amp) LPH-CH41 V5-B Harness (rear signal from amp) LPH-CH41 V5-C Harness (front signal to amp) LPH-CH41 V5-D Harness (rear signal to amp) LPH-CH41 V5-E Harness (sub signal to amp T-harness) LPH-CH41 V5-F Harness (power extension)Owner's manualsLPH Harness Instruction GuideCompatibility Requirements/Notes: 2021 Dodge Durango: Not compatible in models with 10.1" screenThis harness is designed to work on OEM NON-AMPLIFIED systems. Not compatible in vehicles equipped with a factory amplifier.Only compatible with vehicles equipped with a factory 52-pin radio connector.The power and ground wires in this harness will only support a low-current accessory, like an active line output converter or digital signal processor, and should not be used to power an amplifier.Vehicle CompatibilityMakeModelYearChrysler2002015-2017Chrysler3002015-2023DodgeChallenger2015-2023DodgeCharger2015-2021DodgeDurango2014-2021DodgeRAM Truck2013-2021JeepCherokee2015-2021JeepCompass2018-2020JeepGladiator2021-2023JeepGrand Cherokee2015-2021JeepRenegade2015-2023JeepWrangler (JL)2018-2023JeepWrangler (4XE)2018-2022JeepWrangler Unlimited (JL)2018-2023RAMRam Truck2013-2021***Only compatible with the above listed vehicles***LPHCH41 FeaturesSimplifies audio equipment installation.Provides all necessary high-level input and speakers outputs for aftermarket audio equipmentCan be used with: PAC LocPRO Line Output Converters, and Audiocontrol's Amplifiers, DSPs and Line Output Converters.Available 17' extension for further flexibility (LPHEXT17) (Not included)LC2i PRO FeaturesCompact Chassis Design- This active, high-voltage OEM line converter features a compact chassis for an unobtrusive installation.Two Channel Speaker-Level Input- Accepts up to 400-watt per channel signals. The two-channel line-output converter features removable set-screw Phoenix terminals for quick connection.9.5V Preamp Outputs- Equipped with 9.5-volt RMS (13-volt peak) preamp outputs w/ level matching controls. It features a pair of Main preamp outputs (for full-range amplifiers) and a pair of Bass preamp outputs (for subwoofer amplifiers).Line Driver- Features a set of RCA pre-amp inputs that can provide additional signal boost if needed. This is especially helpful when connecting to an older head-unit with a lower pre-amp output voltage.Level Control & Maximized Indicator- The pre-amp output level can easily adjust to its optimum level using the Level dial and Maximized LED indicator. As the Level control is turned up during playback, the Maximized LED will light to indicate the signal is close to clipping and will need to be backed down from that point. This allows you to get the loudest clean signal out to your amp without distortion.Load Select- This slide-switch lets you select one of three input loads to best match the factory system, preventing it from muting the output with no load detected. 20Ω: Best suited for late model Dodge/Chrysler/Jeep/RAM/Fiat vehicles with a non-amplified OEM sound system. 60Ω: Best suited for late model Dodge/Chrysler/Jeep/RAM/Fiat vehicles with an amplified, or "Premium", sound system. 20kΩ: Used for most other vehicle applications.Trigger Mode- Three methods of activation, via a 3-way switch:GTO (Great Turn On) Signal Sense: This turn-on method can sense a DC offset when the factory radio is powered on.Audio: Activates when a sound source is played, regardless of factory radio already being powered on.Remote In: Uses the "traditional" method of activation, with a +12V input on the Remote In terminal.Ground Isolation Switch- Three signal-ground options are provided for eliminating grounding noise problems: GND: Power ground and audio ground are tied together.ISO: Power ground and audio ground are separated.200Ω: Provides 200 ohms of resistance between power ground and audio ground.AccuBass -AccuBass processing automatically corrects for the bass roll-off that is common with many factory installed audio systems. AccuBass Bass Compensation works at any volume level.Threshold and Level Controls- Allow users to optimize the bass response to match their speaker system.GTO (Great Turn On)- The LC2i PRO utilizes selectable GTO auto sensing turn-on circuitry so no remote wire is needed. The LC2i PRO turns on using the unit's speaker-level inputs. It also provides a 12-volt trigger output to turn on your amplifier.LC2i PRO SpecificationsMaximum Input Handling: 40V/400W (20kΩ setting)Maximum Output Level: 9.5VrmsOutput Gain: ± 12dBFrequency Response: 20Hz - 50kHzTHD: 0.01%Signal to Noise: >110dBACR-1 Attenuation Range: 0dB to -19dBInput Impedance: Selectable - 20Ω, 60Ω, and 20kΩOutput Impedance: 150ΩPower Draw: 200mARecommended Fuse Rating: 1A (not included)LC2i PRO Weight & DimensionsWidth: 6-15/16"Height: 1"Depth: 3"Weight: 0.75 lbAudioControl Warranty Policy AudioControl products are designed, engineered, and tested at our facility located in the Pacific Northwest, USA. Given our huge commitment to quality, AudioControl comfortably warranties all materials and workmanship on our products for a period of five years from the date of purchase, provided it is installed by an authorized AudioControl dealer. Should you choose to install it yourself, your warranty is one year from the date of purchase from an authorized AudioControl dealer.A Few Words About Warranties People are scared of warranties. Lots of fine print. Months of waiting around. Well, fear no more, this warranty is designed to make you rave about us to your friends. It’s a warranty that looks out for you and helps you resist the temptation to have your friend, “…who’s good with electronics”, try to repair your AudioControl product. So go ahead, read this warranty, then take a few days to enjoy your new AudioControl processor before registering the warranty card and comments.“Conditional” doesn’t mean anything ominous. The Federal Trade Commission tells all manufacturers to use the term to indicate that certain conditions have to be met before they’ll honor the warranty. If you meet all of these conditions, we will warranty all materials and workmanship on your AudioControl product for one year from the date you bought it from an authorized AudioControl dealer (five years if it is installed by an authorized AudioControl dealer). We will fix or replace it, at our option, during that time.Here Are The Conditional Conditions1. You have to go online and register your AudioControl products. Alternatively, you may fill out the Warranty Registration card that came with your product and mail it to us.2. You must keep your sales receipt for proof of purchase showing when and from whom the unit was bought. We’re not the only ones who require this, so it’s a good habit to get into with any major purchase.3. Your AudioControl products must have originally been purchased from an authorized AudioControl dealer. You do not have to be the original owner, but you do need a copy of the original sales slip.4. You cannot let anybody who isn’t: (A) the AudioControl factory; (B) somebody authorized in writing by AudioControl to service your product. If anyone other than (A) or (B) messes with your AudioControl product, that voids your warranty.5. The warranty is also void if the serial number is altered or removed, or if your AudioControl component has been used improperly. Now that sounds like a big loophole, but here is all we mean by it. Unwarranted abuse is: (A) physical damage (don’t use it to level your RV); (B) improper connections (120 volts AC into a 12 volt DC power jack can fry the poor thing); (C) sadistic things (your imagination is best kept private).. This is the best product we know how to build, but if you mount it to the front bumper of your car or use it as a counter-weight for your daughter’s trebuchet project, something will go wrong.6. If an authorized United States AudioControl dealer installs your component, the warranty is five years.Assuming you conform to 1 through 6, and it really isn’t all that hard to do, we get the option of fixing your old unit or replacing it with a new one. To initiate a warranty claim, please contact AudioControl and we will issue an RA (Return Authorization) number and provide shipping instructions. Products received at AudioControl without an RA number will be refused.Legalese Section This is the only warranty given by AudioControl. This warranty gives you specific legal rights that vary from state to state. Promises of how well your AudioControl component will perform are not implied by this warranty. Other than what we have covered in this warranty, we have no obligation, express or implied. Also, we will not be obligated for direct or indirect consequential damage to your system caused by hooking up your AudioControl component.Failure to properly register your AudioControl warranty may negate any service claims.Additional Notes We recommend having a professional certified technician handle the installation. For any questions or concerns about the product, please contact us through the "Contact Seller" feature for technical support or customer assistance.

Price: 189 USD

Location: San Juan, Puerto Rico

End Time: 2025-02-08T16:27:17.000Z

Shipping Cost: N/A USD