2pcs DC Buck Boost Voltage Converter Constant Current Module Step Power Up/Down

Description: Package Include: 2 x module Input voltage: 5-30VOutput voltage: 0.5-30VConversion efficiency: about 88%Working frequency: 180KHZOutput current: can work stably at 3A for a long time, and can reach 4A under enhanced heat dissipation.Output power: 35W for natural heat dissipation, 60W for enhanced heat dissipation. Maintain stable output voltage and limit the output current over a wide range of input voltages. Great for general voltage conversion, battery charging, powering raw LEDs, automotive electronics, battery conversions, micro-controllers, and electronic projects.Input Voltage: 5-30V DC, Output Voltage: 0.5-30V DC, Max Load: 60W/4A Peak, 35W/3A Sustained (whichever is lower, amps or watts)Conversion Efficiency: Up to 88%, (our test results: 24V->12V1A: 86.5%, 12V->16V1.5A: 85%, 8V->16V1.5A: 74%)Dimensions: 65x32x21mm, FP5139 IC with External MOSFET, SEPIC Topology, 180KHz Switching FrequencyLow input voltage or a large difference between input and output voltage will degrade the current capacity and efficiency (boosting 5V to 12V only works with very low current). The module will cut out if it is unable to source enough input current. The single-ended primary-inductor converter (SEPIC) is a type of DC/DC converter that allows the electrical potential (voltage) at its output to be greater than, less than, or equal to that at its input. This is one of our favorite modules because it offers buck/boost capability, current limiting, and high operating efficiency. Please note that the item is shipped without the heatsink attached. Simply remove the adhesive backing from the heatsink and place it on the board as shown in the product photo. On Jul 22, 2024 at 00:32:17 PDT, seller added the following information:

Price: 12.48 USD

Location: Bordentown, New Jersey

End Time: 2024-10-22T06:41:17.000Z

Shipping Cost: 0 USD